Rust freckles

Everything regarding .22 pistols, revolvers and rifles.
Post Reply
fridlo
Posts: 102
Joined: Thu Jul 19, 2018 4:00 pm
Location: Brevard

Rust freckles

Post by fridlo »

I have been given a 1948 Remington 241. The bore seems okay, but the finish has rust freckles all over it. I have read to scrub the finish with oil and 0000 steel wool. Is that standard, or is there a better way to get rid of the rust? Thanks, Fridlo
fridlo45@yahoo.com
indy1919a4
Posts: 237
Joined: Fri Jul 20, 2018 4:48 pm

Post by indy1919a4 »

You can use the old copper Penny routine.. It seems brutal but it works... I have had just as good a luck with oil & steel wool and you can compromise and use copper wool..

fridlo
Posts: 102
Joined: Thu Jul 19, 2018 4:00 pm
Location: Brevard

Post by fridlo »

Thanks Indy, I'll give it a try with oil and the copper penny.

Fridlo
TC6969
Posts: 1039
Joined: Wed Jul 18, 2018 2:40 pm
Location: Cocoa

Post by TC6969 »

Oil and steel wool works great, but you can go down to bare metal easily.

You need to go lightly with the steel wool.

Let it float on the oil, dont bear down too hard.
User avatar
rentprop1
Posts: 1043
Joined: Wed Jul 18, 2018 5:05 pm
Location: West Central FL
Contact:

Post by rentprop1 »

Just keep in mind steel wool is bound wire ...anytime you rub metal on metal you're sure to damage a finish.

Many people have had good luck applying kroil and then taking an old pair of blue jeans and lightly scrubbing.

The Kroll will actually break up most of that surface rust and penetrate underneath of it lifting it slightly to where you can then rub it off with the blue jean denim material.
P5 Guy
Posts: 1311
Joined: Fri Jul 20, 2018 1:20 pm
Location: St Pete

Post by P5 Guy »

fridio, listen to rent.
Kano's Kroil will penetrate and lift the rust, rub it down with a old t shirt of a piece of denim.
fridlo
Posts: 102
Joined: Thu Jul 19, 2018 4:00 pm
Location: Brevard

Post by fridlo »

I have Kroil, so I'll give it a try with denim. Thanks, guys.
Fridlo
Post Reply