Page 1 of 1

One of America's legendary small arms was designed by a convict

Posted: Tue Jan 29, 2019 12:32 pm
by lakelandman
https://www.wearethemighty.com/gear-tec ... belltitem1
One of the most decorated soldiers in American history had his big day on Jan. 26, 1945. For three hours, he fought off dozens of advancing Nazi troops, coming at him from three sides. He did it with a field phone, an M2 Browning .50-cal, and his trusty M1 Carbine. General MacArthur called the M1 carbine, "One of the strongest contribution factors in our victory in the Pacific."

That carbine was a weapon designed just for Army paratroopers in World War II. It had its shortcomings, but its reliability would ensure it would see action in three American wars — and was even a preferred weapon of the enemy. But not many people know the steadfast weapon was designed by a self-taught gunsmith, one-time moonshiner, and convicted felon.

David Williams started making moonshine in North Carolina's backcountry in 1919. The only problem was the Cumberland County native was good at it — really good. Soon, word spread about the quality of the young man's whiskey. With the rise of Prohibition in 1920, his elevated status soon became unwanted attention. The very next year, his still was raided by local law enforcement, and a shootout ensued. Williams shot and killed a deputy sheriff.

He was captured, convicted of second-degree murder, and sentenced to 30 years in state prison.

Audie Murphy with an M1 carbine in 'To Hell And Back,' the film about his Medal of Honor experience in World War II.

The man who would later earn the nickname "carbine" spent a lot of time in both the prison blacksmith shop, as well as solitary confinement. An inventive tinkerer with no formal training, he spent his time in the box thinking of new ways to improve existing machines — including firearms. He began to make spare parts from scrap metal and wood, which, in turn, earned him more time in the shop. The more time he spent in the shop, the more good he did for himself and society.

It turns out the uneducated tinkerer was exceptionally adept with machine parts. He invented the floating chamber, a mechanism that allowed a larger caliber rifle to fire smaller .22 ammo. While other prisoners were known for building homemade knives, Williams was able to construct rifles from scraps.

David Marshall "Carbine" Williams with his contribution to World War II.

He earned an early release in 1929 and returned to his farm, where he constructed a large workshop and began to refine his inventions. Eventually, he was employed by the Winchester Repeating Firearms Company. Just before World War II broke out for the United States, he was able to develop a carbine version of the M1 Garand Rifle.

A carbine is essentially a shorter version of an existing rifle. It's often lighter in weight and uses a shorter barrel but doesn't sacrifice much in the way of consistency or accuracy. The M1 carbine, however, was not just a carbine version of the M1 Garand. The two firearms used different ammunition, and the only features they shared were the buttplate and screw. But there was a need for lighter weapons among paratroopers and support crew.

M1 Carbines were present at the first Iwo Jima flag raising.

Williams self-designed and built a short-stroke gas piston while in prison and incorporated it into his design for a lighter-weight infantry rifle. In trials, "Carbine" WIlliams' design proved much more effective and consistent than other gun manufacturers, especially in sandy conditions — an environment that would prove very important to the Marine Corps.

By the end of World War II, the U.S. Military produced more than six million M1 Carbine rifles to use against the Nazis and the Japanese, making it America's most-produced small arm of the war, edging out the iconic M1 Garand by more than a million units.

Re: One of America's legendary small arms was designed by a convict

Posted: Tue Jan 29, 2019 1:34 pm
by indy1919a4
Nice gun tale...

David "Carbine" Williams is one of those true characters in the gun world.

I have read that he was a bit of a pain to work with. Another invention the Mr Williams is responsible for is an adaptor for 1919s & 1917s to be able to shoot 22 LR in a full auto mode..

The darn thing is simple & almost unbelievable that it works..



[youtube]Ry-ebLlaEGo[/youtube]


Image

Re: One of America's legendary small arms was designed by a convict

Posted: Tue Jan 29, 2019 2:14 pm
by Clyde621
His shop interior was removed from his home and reconstructed in the NC Museum of History. Located in downtown Raleigh. I have seen it several times. Everything down to bottle tops on window sills and cigarette packs was reconstructed. Very interesting.

Re: One of America's legendary small arms was designed by a convict

Posted: Tue Jan 29, 2019 2:30 pm
by indy1919a4
Clyde621 wrote: Tue Jan 29, 2019 2:14 pm His shop interior was removed from his home and reconstructed in the NC Museum of History. Located in downtown Raleigh. I have seen it several times. Everything down to bottle tops on window sills and cigarette packs was reconstructed. Very interesting.
Wow... did not know that... I will need to stop there.. Here is a link with some visuals again wow.. thanks for that...

Had to look lots of nice photos online

https://www.ncmuseumofhistory.org/exhib ... e-williams

Re: One of America's legendary small arms was designed by a convict

Posted: Tue Jan 29, 2019 6:03 pm
by Waldo1
Awesome movie made about his life decades ago, with Jimmy Stewart in the lead role.

https://www.imdb.com/title/tt0044480/

Re: One of America's legendary small arms was designed by a convict

Posted: Tue Jan 29, 2019 6:47 pm
by Iosef
It's amazing how much your memory can deceive you. I recall seeing the movie as a kid. The thing is, I remember Jimmy Stewart demonstrating the reliability of a lever action rifle by dunking it in a trough of muddy water before loading the single cartridge a guard handed him. Since I know the M1 Carbine isn't lever action, obviously I am misremembering it.

Re: One of America's legendary small arms was designed by a convict

Posted: Tue Jan 29, 2019 10:34 pm
by indy1919a4
Iosef wrote: Tue Jan 29, 2019 6:47 pm It's amazing how much your memory can deceive you. I recall seeing the movie as a kid. The thing is, I remember Jimmy Stewart demonstrating the reliability of a lever action rifle by dunking it in a trough of muddy water before loading the single cartridge a guard handed him. Since I know the M1 Carbine isn't lever action, obviously I am misremembering it.
Isn't it scary how you can dis remember something.. Swear you saw or heard something.. and then later see it and are gobsmacked how different it is... IE.. at one time I thought H R pufnstuf was quality TV shows, till I watched them a little older...

But here is the Carbine Williams movie and if you skip to 1:26:20 you can see the test..

https://ok.ru/video/447685528206

Re: One of America's legendary small arms was designed by a convict

Posted: Wed Jan 30, 2019 12:49 am
by Situationalray
lakelandman wrote: Tue Jan 29, 2019 12:32 pm https://www.wearethemighty.com/gear-tec ... belltitem1
One of the most decorated soldiers in American history had his big day on Jan. 26, 1945. For three hours, he fought off dozens of advancing Nazi troops, coming at him from three sides. He did it with a field phone, an M2 Browning .50-cal, and his trusty M1 Carbine. General MacArthur called the M1 carbine, "One of the strongest contribution factors in our victory in the Pacific."

That carbine was a weapon designed just for Army paratroopers in World War II. It had its shortcomings, but its reliability would ensure it would see action in three American wars — and was even a preferred weapon of the enemy. But not many people know the steadfast weapon was designed by a self-taught gunsmith, one-time moonshiner, and convicted felon.

David Williams started making moonshine in North Carolina's backcountry in 1919. The only problem was the Cumberland County native was good at it — really good. Soon, word spread about the quality of the young man's whiskey. With the rise of Prohibition in 1920, his elevated status soon became unwanted attention. The very next year, his still was raided by local law enforcement, and a shootout ensued. Williams shot and killed a deputy sheriff.

He was captured, convicted of second-degree murder, and sentenced to 30 years in state prison.

Audie Murphy with an M1 carbine in 'To Hell And Back,' the film about his Medal of Honor experience in World War II.

The man who would later earn the nickname "carbine" spent a lot of time in both the prison blacksmith shop, as well as solitary confinement. An inventive tinkerer with no formal training, he spent his time in the box thinking of new ways to improve existing machines — including firearms. He began to make spare parts from scrap metal and wood, which, in turn, earned him more time in the shop. The more time he spent in the shop, the more good he did for himself and society.

It turns out the uneducated tinkerer was exceptionally adept with machine parts. He invented the floating chamber, a mechanism that allowed a larger caliber rifle to fire smaller .22 ammo. While other prisoners were known for building homemade knives, Williams was able to construct rifles from scraps.

David Marshall "Carbine" Williams with his contribution to World War II.

He earned an early release in 1929 and returned to his farm, where he constructed a large workshop and began to refine his inventions. Eventually, he was employed by the Winchester Repeating Firearms Company. Just before World War II broke out for the United States, he was able to develop a carbine version of the M1 Garand Rifle.

A carbine is essentially a shorter version of an existing rifle. It's often lighter in weight and uses a shorter barrel but doesn't sacrifice much in the way of consistency or accuracy. The M1 carbine, however, was not just a carbine version of the M1 Garand. The two firearms used different ammunition, and the only features they shared were the buttplate and screw. But there was a need for lighter weapons among paratroopers and support crew.

M1 Carbines were present at the first Iwo Jima flag raising.

Williams self-designed and built a short-stroke gas piston while in prison and incorporated it into his design for a lighter-weight infantry rifle. In trials, "Carbine" WIlliams' design proved much more effective and consistent than other gun manufacturers, especially in sandy conditions — an environment that would prove very important to the Marine Corps.

By the end of World War II, the U.S. Military produced more than six million M1 Carbine rifles to use against the Nazis and the Japanese, making it America's most-produced small arm of the war, edging out the iconic M1 Garand by more than a million units.
Awesome

Re: One of America's legendary small arms was designed by a convict

Posted: Wed Jan 30, 2019 3:38 am
by osprey21
Williams developed the "floating chamber" to give the belt guns enough energy to cycle.

One of four (reportedly) in existence - Winchester 1917 dedicated .22 trainer from the Winchester museum.

Image

Re: One of America's legendary small arms was designed by a convict

Posted: Wed Jan 30, 2019 11:39 am
by indy1919a4
osprey21 wrote: Wed Jan 30, 2019 3:38 am Williams developed the "floating chamber" to give the belt guns enough energy to cycle.

One of four (reportedly) in existence - Winchester 1917 dedicated .22 trainer from the Winchester museum.
Many thanks I was not aware of those.. Now that would be a blast.. I remember more then a few years ago Bill Atkins had worked up a nice water cooled dress up kit for a 10/22.. I had hoped for that to come to market someday..