Page 1 of 1
Reloading 32 rimfire
Posted: Sun Feb 17, 2019 3:39 pm
by indy1919a4
Came across this little item about reloading 32 Rimfire.. From looking at other places, the biggest negative is that the brass is a tad fragile and can be damaged.. that being said looks better than nothing..
Viddy well little brothers viddy well
https://www.ammoland.com/2017/12/32-...#axzz5fpDvLrow
Re: Reloading 32 rimfire
Posted: Sun Feb 17, 2019 9:59 pm
by Nick Danger
32 rimfire rounds have identical measurements as 32 Colt.
A guy on GB will sell you 32 Colt brass with offset primer holes that take 22 blanks, and Bob's your uncle.
Much easier!
Re: Reloading 32 rimfire
Posted: Sun Feb 17, 2019 11:54 pm
by indy1919a4
Nick Danger wrote: ↑Sun Feb 17, 2019 9:59 pm
32 rimfire rounds have identical measurements as 32 Colt.
A guy on GB will sell you 32 Colt brass with offset primer holes that take 22 blanks, and Bob's your uncle.
Much easier!
Neat, Have you reloaded these??? How well did they work..?? The brass in the article seems to be very similar.
Re: Reloading 32 rimfire
Posted: Mon Feb 18, 2019 12:42 pm
by Nick Danger
I bought a dozen pieces of re-worked brass, they work fine, don't need much powder as the 22 blank gives it a little push.
Work your loads up slow, start with maybe 1.5 grains of Bullseye or similar.
Remember 32 Colt, not 32 Colt New Police, which is just 32 S&W long with a flat nose.
Colt just couldn't bring themselves to chamber a gun in a cartridge that said S&W.
Nick
Re: Reloading 32 rimfire
Posted: Mon Feb 18, 2019 1:18 pm
by indy1919a4
Nick Danger wrote: ↑Mon Feb 18, 2019 12:42 pm
I bought a dozen pieces of re-worked brass, they work fine, don't need much powder as the 22 blank gives it a little push.
Work your loads up slow, start with maybe 1.5 grains of Bullseye or similar.
Remember 32 Colt, not 32 Colt New Police, which is just 32 S&W long with a flat nose.
Colt just couldn't bring themselves to chamber a gun in a cartridge that said S&W.
Nick
What kind of 22 blanks are you talking about 22 drive nail blanks??
Re: Reloading 32 rimfire
Posted: Tue Feb 19, 2019 11:37 pm
by Nick Danger
nope, the kind you use in starter pistols.
Nick
Re: Reloading 32 rimfire
Posted: Wed Feb 20, 2019 9:46 am
by indy1919a4
I liked the guy in the link using the 22 short case as an ignition. Seems there will be no real pressure from that. And I think of you are shooting more older guns the black powder would be a better powder to use